Professional Tips & Advice

Sienna Secrets: Spray Tan Tips

2 Min Read Monday 24th August 2020

Do these sound familiar to you?

  • I seem to be getting through a lot of solution
  • My cubicle is very wet and clients can often brush against the cubicle and has more tan on my clients than I’ve sprayed
  • My client is quite wet when I or my team are spraying and it takes ages to dry them off
  • The room is covered in tan
  • I have limited returning clients
  • I spray two coats of solution

These are sure signs that you are spraying far too much.

You should be getting 18-20 tans from a litre bottle of solution. Sienna X training involves spraying very closely, a hands distance away and Sienna X only sprays once, which enables much less solution being used, more accurate spraying for a seamless tan, much less overspray (cleaner cubicle and room) and much quicker drying time – happy days.

Top Tip for Solution Bottles

Start with a new bottle and mark off on the bottle after every tan (or daily tans), remember to pour your gun solution back into the bottle and clean your gun through ideally daily.

If you get to halfway and you are at 8-10 tans then you are doing ok, brilliant. Any lower then turn your gun flow down so that you can stand a hand distance away and leave a sheen on your clients’ skin.

Start with the clients back and you can adjust it more easily and your client will feel less nervous too.

If you’ve not yet trained with Sienna X then we highly recommend you do. If we double your tan usage out of one bottle, it will be more than worth it.

If you have any tips you would like to share, then feel free to email us at [email protected] or share them in the Facebook Sienna X Professional group.

Happy Tanning…

0 item in your basket

£0.00

X